AKAOGAS SHORT COURSE 2023
Terlampir Judul/ Topic Short Course AKAOGAS Training Center

 

1. SAFETY TRAINING

    1. Pertamina Life Saving rules.
    2. Oil and Gas Project Code Of Conduct
    3. Working at Height
    4. Commissioning Area Induction
    5. Life-Saving Rules
    6. Hazardous Area Classifications
    7. Job Safety Analysis
    8. Risk and Human Factors
    9. Hazard Assessment
    10. Basic safety engineering, occupational health, safety and environment(hse)
    11. Process safety management ( psm )
    12. Accident investigation
    13. Safety audit

 

2. INSTRUMENTATION TRAINING

    1. Basic Instrumentation Training
    2. Basic Design Programmable Logic Control
    3. Basic of SCADA
    4. Tube and Pipe Fittings
    5. Instrument and analyzer Training
    6. Instrument Module For Technician
    7. The Basics of Piping and Instrumentation Diagrams and Symbols
    8. Fire and Gas Detection and Control in the Process Industry
    9. Mark II & Mark IV Gas Turbine Control System.

 

3. ELECTRICAL TRAINING

    1. Basic Electrical Training
    2. Electrical & Electronic Formulas
    3. Implementation of Wind Energy and Wind Turbine Technology
    4.  Use and Maintenance of Rechargeable Battery
    5. Electrical Distribution System Protection
    6. Electrical Grounding & Bonding
    7. Electric Motors Energy Efficiency Reference Guide
    8. Basic Principle of Electric Generator
    9. Basic Principle of Electric Generator

 

4. MECHANICAL, EQUIPMENT TRAINING

    1. Turbo-machinery / rotating equipment problem and troubleshooting
    2. Cogeneration and heat recovery steam generator. (co-gen and hrsg )
    3. Process piping systems
    4. Boiler – steam generator
    5. Machinery failure analysis
    6. Heat exchangers (shell & tube, plate heat exchanger, finned tube, cooling tower )
    7. Industrial gas turbine
    8. Heating furnace / reformer / fired heater hydrocracker and flare stack
    9. Pressure vessels and static equipment
    10. Gas turbine operation & maintenance.
    11. Steam turbine
    12. Gas compressor
    13. Storage tanks
    14. Mechanical vibration data acquisition, monitoring, and interpretation
    15. Marine loading arm
    16. Mechanical valves
    17. Welding technology for non-welder
    18. Scaffolding system
    19. Bearing and lubrication.
    20. Centrifugal pump.
    21. Seal (pump – mechanical seal, compressor – dry gas seal)
    22. Mechanical troubleshooting, fundamental
    23. Lifting crane (mobile crane, pedestal crane, overhead crane)
    24. Forklift
    25. Rigging technology and application

 

5. ANALYSER SYSTEMS TRAINING

    1. Process Sampling Techniques
    2. Basic Fundamental of Gas Chromatograph
    3. Practical Guide for Process Analyser System
    4. Managing Critical Spare Parts For On-Line Analysers Equipment
    5. Analyser Maintenance Strategy
    6. Fire and Gas Training
    7. Analyser Equipment Module
      • CO2 Analyser
      • Moisture Analyser
      • H2S Analyse
      • Gas Chromatograph
      • pH Analyser
      • Conductivity Analyser
      • Basic Principles Measurement of Sulfur Analyzer
      • Basic Principles Measurement of ORP Analyzer
      • Basic Principles Measurement of pH Analyzer
      • Basic Principles Measurement of Conductivity Analyzer
      • CO2 Analyzer System Maintenance

 

6. HSE (K3) TRAINING

    1. Firefighting Training
    2. H2S Training
    3. K3 Umum Training
    4. K3 Migas Training

 

7. OIL AND GAS PROCESS TRAINING

    1. LNG Process Overview
    2. Basic design LNG (Liquid Natural Gas) Train Process (4 Modules)
    3. Basic design LNG Storage, Loading & BOG Design Training (4 Modules)
    4. LNG Safety and Technology.
    5. Separation Unit (SRU)
    6. Regasification and LNG Hub.
    7. Storage & Loading.
    8. Utility System Process.

 

8. UPSTREAM OIL AND GAS PROCESS TRAINING

    1. Basic Drilling
    2. Introduction to Drilling
    3. Introduction to Production Operation
    4. Oil & Gas Process and Storage
    5. Pipeline System and Operation
    6. Introduction to Artificial Lift
    7. Oil & Gas Well Operation
    8. Gas Lift Design and Operation and Trouble Shooting.
    9. Corrosion Control and Cathodic Operation
    10. Selecting Artificial Lift for Production
    11. ESP for Production
    12. Petroleum Project Management & Risk Analysis
    13. Production Optimization

 

9. MANAGEMENT

    1. Maintenance management, / computer-based maintenance management
    2. Predictive maintenance
    3. Maintenance shop management ( bengkel pemeliharaan )
    4. Turnaround / shut down / outages management
    5. Reliability-centered maintenance – RCM
    6. Oil and gas operator routine duty and checklist
    7. Training for the trainers of oil and gas /petrochemical /power plants

 

Instruktur kami adalah para praktisi ex pekerja dalam dan luar negeri diataranya ex ARUN NGL, EX EXXON, EX PERTAMINA & PIM (PT.Pupuk Iskandar Muda) dan sudah pernah bekerja/berpengalaman dari luar negeri.

Silahkan hubungin kami untuk mendapatkan harga yang special atau permintaan judul lainnya sesuai dengan kebutuhan perusahaan Bapak/Ibu.
Terimakasih